Digital Multimeter 4000 Count TrueRMS 10 Function with Test Leads

Features

• Built-in data hold function: This function allows you to easily hold and read measured values even after disconnecting the measurement leads. This ensures accurate and reliable measurements.
• High accuracy with 4000 counts: This multimeter offers high accuracy in measuring various electrical values such as voltage (volts) and resistance (ohms).
• Non-contact voltage detection: The NCV function allows you to detect the presence of voltage at a safe distance, without making direct contact with the cables.
• REL function: The initial value at the start of the measurement is stored as the reference value (= zero). The difference between the subsequent readings and the reference value is shown on the display.
• Min/Max function: The meter records and then displays the minimum and maximum values.
• Automatic and manual range setting
• Backlight: A large backlit display ensures good readability even in poor lighting conditions.
• Zippered carry pouch

Overview

This digital multimeter is the perfect tool for electricians, do-it-yourselfers, and hobbyists. Thanks to its compact and robust design, you can take it anywhere. The very complete multimeter is suitable for measuring voltage, current and resistance using the supplied test leads (100 cm).

The meter has a True RMS function, which ensures accurate voltage and current measurements. Additionally, the meter features a MIN/MAX and REL function. The meter has a backlit 4000 count display, making readings easy to read. With a safety category of CAT III - 1000 V and a current measurement of 500 mA and 10 A at 1000 V, you can be sure of safe use.

Technical Specifications

Physical properties

• Cable length: 1 m
• Display height: 32 mm
• Display width: 56 mm
• Display type: LCD
• Backlight: Yes
• Maximum digits display: 4000

Electrical data

• Continuity test: Yes
• AC current: basic accuracy: ±(1.5% +5)
• AC voltage: basic accuracy: ±(0.8% +5)
• Audible continuity measurement: Yes
• Automatic polarity indication: Yes
• Capacity: basic accuracy: ±(4.0% +15)
• DC current: basic accuracy: ±(0.8% +5)
• DC voltage: basic accuracy: ±(0.5% +5)
• Diode test: Yes
• Frequency: basic accuracy: ±(0.5% +2)
• Fuse type: F 0.50 A / 1000 V, 6,35 x 32 mm, F 10 A / 1000 V, 6.35 x 32 mm
• Transistor test: Yes
• True rms: Yes
• AC current measurements: 0.1 µA to 10 A
• AC voltage measurements: 0.01 mV to 750 V
• Capacity measurements: 10 pF to 100 mF
• DC current measurements: 0.1 µA, to 10 A
• DC voltage measurements: 0.01 mV to 1000 V
• Frequency measurements: 10 Hz to 10 MHz
• Resistance measurements: 0.1 ohm to 40 Mohm
• Resistance specifications: basic accuracy: ±(0.8% +5)

Technical data

• Safety rating: Cat III / 1000 V
• Automatic power-off function: Yes
• Data-hold function: Yes
• Relative value measurement: Yes
• Remote voltage test: Yes

Environmental data

• IP rating: IPx0
• Usage location: Indoor only

Operational properties

• Range setting: Automatic

Power supply

• Batteries: Yes
• Number of batteries: 1
• Low battery indicator: Yes
• Battery IEC size: 9 V

Included

• with LED light: No
• Set contents:
• silicone sleeve
• Carry pouch with zipper
• TLM80: Test lead set - CAT III 1000 V / CAT IV 600V - length 100 cm