DeoxIT® D-Series Contact Cleaner Pre-Treated Swabs 10 Count

Features

• 100% liquid, no solvents
• Applicator: Pre-treated foam swabs, 1/4 x 3/4 x 4-1/2?, provides non-abrasive wiping action, applies 100% DeoxIT®
• Formulation: 100% DeoxIT®
• Improves Conductivity
• Deoxidizes, Lubricates and Protects
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• Temperature Range, -34 C (-29 F) to +200 C (400 F)

Overview

DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface. For reference, DeoxIT® has approximately 20% deoxidizing action.

Use When contact and connector are easily accessible. Provides wiping action - wipe with the grain recommended. No flushing action. Applicator is a single use, multi-application swab. Open, use on multiple connections, then discard swab. Use when overspray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.